ESCs
5 products
SEQURE Blueson A1 6S 65A AM32 4-in-1 ESC
The SEQURE Blueson A1 6S 65A is a 4-in-1 ESC with AM32 firmware for 2–6S LiPo and LiHV FPV builds. It uses an AT32F421 32-bit processor with an adjustable 8–128kHz PWM frequency. Telemetry and current sensing are supported, with a 20 × 20mm M3 mounting pattern. Specifications ESC type: 4-in-1Firmware: AM32Processor: AT32F421Input voltage: 2–6S LiPo or LiHVContinuous current: 65A per channelPeak current: 120A per channelPWM frequency: 8–128kHzMotor protocols: DShot150, DShot300, DShot600, OneShot, MultiShot and PWMTelemetry: SupportedCurrent sensing: SupportedBEC: NoneMounting pattern: 20 × 20mm, M3Dimensions: 42.5 × 36 × 7mmProduct weight: Approximately 19g Included 1 × SEQURE Blueson A1 4-in-1 ESC1 × 30AWG 40mm reverse double-ended SH1.0-8P cable1 × 30AWG 60mm single-ended SH1.0-8P cable2 × 12AWG 100mm power cables, red and black1 × XT60H-M male connector1 × 35V 680µF solid capacitor5 × M3 × 8mm shock-absorbing mounts Important This ESC does not include a BEC. Check the power requirements of the flight controller, receiver and video system before installation. Use the supplied capacitor and appropriately rated battery cable and connectors. Confirm firmware settings, motor direction and failsafe operation before fitting propellers.
SEQURE Blueson A1 8S 70A BLHeli_32 4-in-1 ESC
The SEQURE Blueson A1 8S 70A is a 4-in-1 ESC with BLHeli_32 firmware for 2–8S LiPo and LiHV FPV builds. It uses an AT32F421 32-bit processor with an adjustable 8–128kHz PWM frequency. Telemetry and current sensing are supported, with a 20 × 20mm M3 mounting pattern. Specifications ESC type: 4-in-1Firmware: BLHeli_32Processor: AT32F421Input voltage: 2–8S LiPo or LiHVContinuous current: 70A per channelPeak current: 150A per channelPWM frequency: 8–128kHzMotor protocols: DShot150, DShot300, DShot600, OneShot, MultiShot and PWMTelemetry: SupportedCurrent sensing: SupportedBEC: NoneMounting pattern: 20 × 20mm, M3Dimensions: 42.5 × 36 × 7mmProduct weight: Approximately 19g Included 1 × SEQURE Blueson A1 4-in-1 ESC1 × 30AWG 40mm reverse double-ended SH1.0-8P cable1 × 30AWG 60mm single-ended SH1.0-8P cable2 × 12AWG 100mm power cables, red and black1 × XT60H-M male connector1 × 35V 680µF solid capacitor5 × M3 × 8mm shock-absorbing mounts Important This ESC does not include a BEC. Check the power requirements of the flight controller, receiver and video system before installation. Use the supplied capacitor and appropriately rated battery cable and connectors. Confirm the firmware settings, motor direction and failsafe operation before fitting propellers.
HGLRC 60A 4-in-1 MINI 8S 32-bit V1 ESC – BL32
Compact HGLRC 60A 4-in-1 MINI 8S 32-bit V1 ESC in the BL32 version, designed for high-voltage FPV builds using a 20 × 20mm mounting pattern.Specifications Brand: HGLRC Model: 60A 4IN1 MINI 8S 32-bit V1 ESC Version: BL32 Input voltage: 3–8S LiPo Continuous current: 60A per channel Peak current: 65A per channel for 10 seconds MCU: QF32MTF4AK8U7 Telemetry: Supported Protocols: DShot300, DShot600, Oneshot, PWM Mounting pattern: 20 × 20mm, M3 Dimensions: 46.8 × 34 × 6.5mm Weight: 14g This listing is specifically for the BL32 version. HGLRC states that firmware revisions can change between production batches, so the exact BL32 revision should be checked on receipt before flashing or updating.
GEPRC TAKER F722 35A 32-Bit AIO Flight Controller & ESC
The GEPRC TAKER F722 35A 32Bit AIO combines an STM32F722 flight controller and 35A 32-bit ESC on a compact board for 2–6S FPV builds.SpecificationsMCU: STM32F722Gyro: ICM42688-P (SPI)Firmware target: GEPRC_F722_AIOInput voltage: 2–6S LiPoESC: 32-bit 35AContinuous current: 35ABurst current: 45A (10s)ESC protocols: DShot600, OneShot and MultiShotBlackbox: 16MB onboard flashOSD: Betaflight OSD, AT7456EUARTs: 5BEC: 5V @ 1AUSB: Type-CBuzzer output: YesLED output: YesMounting: 25.5 × 25.5mmDimensions: 35 × 33.5mmComponent weight: 9.3gIncluded1 × TAKER F722 35A AIO1 × XT30 18AWG 7cm lead1 × 35V 220µF capacitor1 × SH1.0-6-pin cable8 × M2 × 6.5mm dampening ballsImportantCheck motor current draw and accessory power requirements against the 35A ESC and 5V/1A BEC ratings before installation.
GEPRC TAKER H60 Mini AM32 60A 4-in-1 ESC
The GEPRC TAKER H60 Mini AM32 is a compact 4-in-1 ESC for 3–8S LiPo FPV builds, rated at 60A continuous with AM32 firmware.SpecificationsESC model: TAKER H60 Mini AM32 60A 4-in-1Input voltage: 3–8S LiPoContinuous current: 60ABurst current: 65A (5s)Protocol: DShot150 / DShot300 / DShot600Firmware: AM32 GEPRC 4IN1 F421Mounting: 20 × 20mmDimensions: 43 × 36mmComponent weight: 17g with aluminium heat sinkImportantConfirm battery voltage, motor load and firmware settings before installation. Fit and test without propellers before first flight.
Find electronic speed controllers for FPV builds from SEQURE, GEPRC and HGLRC. Our current listings include SEQURE Blueson A1 6S 65A AM32 and 8S 70A BLHeli_32 4-in-1 units, GEPRC TAKER H60 Mini, HGLRC 60A Mini 8S, and an integrated GEPRC F722 AIO flight controller and ESC. An ESC regulates motor power, so selecting the correct battery voltage range, mounting pattern, firmware and current capability is essential. Some models are standalone 4-in-1 boards while an AIO integrates flight-control electronics. Check each product's specifications and the requirements of the rest of your build, particularly the motor and propeller combination, before ordering.