Tools & Accessories

Lightweight low-profile aluminium flange nyloc nuts for FPV drone motors using an M5 × 0.8 threaded prop shaft. At approximately 4.8mm tall, they provide a compact replacement for many standard full-height motor nuts while retaining a nylon locking insert and wide integrated flange. Specifications Product: Low-profile flange nyloc motor nut Thread: M5 × 0.8 internal metric thread Hex size: 8.0mm across flats Flange diameter: 10.8mm Overall height: Approximately 4.8mm Locking system: Nylon insert Material: Aluminium alloy Finish: Colour anodised Pack quantity: 4 matching nuts Colours: Red, blue or gold/yellow Included 4 × matching low-profile M5 flange nyloc motor nuts in the selected colour Compatibility Check the motor shaft before ordering. These nuts require an M5 × 0.8 threaded shaft and will not fit smaller threaded shafts, smooth shafts or alternative prop-retention systems.

HGLRC Kevlar battery-retention strap for securing LiPo packs on FPV builds. Available in two widths at 250mm length, with a lightweight construction and high-grip woven material.Specifications Brand: HGLRC Material: Kevlar Length: 250mm 15 × 250mm weight: 6g 20 × 250mm weight: 8.3g Available sizes 15 × 250mm 20 × 250mm Select the width that best suits the battery and frame layout.

RED WOLF self-adhesive fabric harness tape for protecting, bundling and tidying wiring on FPV builds, battery leads, workshop electronics and automotive looms. The polyester non-woven fabric uses a strong acrylic adhesive and is hand-tearable for quick installation.Specifications Brand: RED WOLF Type: Self-adhesive fabric wiring harness tape Colour: Black Width: 19mm / 3/4in Length: 15m / approx. 50ft Material: Polyester non-woven fabric Adhesive: Acrylic pressure-sensitive adhesive Temperature range: -40°C to 105°C Flame-retardant: self-extinguishing within approximately 30 seconds Hand tearable: Yes Included1 × roll of RED WOLF wiring harness tapeUseful for cable wrapping, wiring looms, battery leads and general workshop cable management.

Knurled aluminium standoffs in multiple sizes and colours.

SEQURE high-temperature insulation tape for FPV electronics, battery work and workshop repairs. The 15mm-wide tape is suitable for insulating and protecting electrical components in applications where heat resistance is important.Specifications Brand: SEQURE Width: 15mm Maximum stated temperature resistance: 180°C Approximate outer roll diameter: 95mm Net weight: 40g Packed weight: approximately 45g Suitable for LiPo and battery wrapping PCB and electronics insulation Electrical repairs Transformers and capacitors Protection boards and workshop use 1 × roll supplied. Roll length is not stated by the manufacturer, so no length specification is claimed on this listing.

The SEQURE 1–8S LiPo Battery Voltage Tester displays total pack voltage and individual cell voltages through a battery’s balance connector. For 2–8S packs, the twin buzzer can also provide an adjustable low-voltage warning.Specifications Battery compatibility: 1–8S LiPo, Li-ion, LiMn and LiFe Low-voltage alarm: 2–8S Alarm setting range: OFF or 2.7–3.8V per cell Default alarm setting: 3.3V per cell Cell-voltage display range: 0.5–4.5V Total-voltage display range: 0.5–36V 1S test-mode range: 3.7–30V Stated voltage accuracy: ±0.01V Alarm indication: twin buzzer and red LED Protection: reverse-polarity protection Dimensions: 40 × 25 × 11mm Net weight: 9g Included1 × SEQURE 1–8S battery voltage tester and low-voltage alarmConnection noteConnect the battery balance plug with its negative wire aligned to the tester’s negative pin. The alarm protects against excessive discharge only when it remains connected and is set appropriately for the battery chemistry and load.

The SEQURE SI012 Pro Max is a compact OLED soldering iron for workshop and field repairs. This listing also includes genuine compatible SEQURE TS replacement tips, so you can choose the complete SI012 Pro Max kit or an individual TS-series spare tip.Choose your item SI012 Pro Max Kit – TS-D24: complete portable soldering iron kit supplied with one TS-D24 tip. TS-D24 Replacement Tip: one compatible replacement tip only. TS-C4 Replacement Tip: one compatible replacement tip only. TS-B2 Replacement Tip: one compatible replacement tip only. SI012 Pro Max specifications Maximum temperature: 450°C / 842°F Power input: USB-C PD3.0, QC2.0, DC 12–25V or 3S–6S LiPo Display: 0.91-inch OLED with adjustable brightness Temperature control: compensation and self-calibration Display options: °C/°F selection and left/right screen rotation Alerts: low voltage, high voltage and high temperature Housing: transparent high-temperature-resistant PC Other functions: adjustable sensitivity, automatic heat-up, power limiting, colour ambient lighting and firmware upgrades Compatible tip families: T12, TS and SI Dimensions with tip fitted: approximately 180 × 16 × 18mm Iron weight with tip: approximately 35g Manufacturer packed weight including outer carton: 240g SI012 Pro Max Kit variant includes 1 × SEQURE SI012 Pro Max soldering iron 1 × TS-D24 soldering tip 1 × soldering-iron stand 1 × storage case 1 × solder wire 1 × XT60-to-DC5525 power cable 1 × hex key with fixing screws Replacement tip informationTS-D24, TS-C4 and TS-B2 are genuine SEQURE replacement tips compatible with the SI012 Pro Max. Each replacement-tip variant contains one tip only. SEQURE states an approximate TS tip length of 103–109mm and describes the tips as using an internal ceramic heating core with the tip and heater integrated.Power and safety noteA mains power supply is not included with the kit. Confirm the polarity and output of any DC, USB-C or battery supply before connection. Disconnect power and allow the tip to cool completely before changing it, and disconnect power when the iron is unattended.

Clear double-sided nano tape for FPV battery grip, component mounting and workshop use. Apply a strip to a suitable clean, smooth mounting surface to help improve grip beneath a LiPo battery when used alongside a correctly tightened battery strap. Also useful for temporary cable management, lightweight mounting and general workshop tasks.Transparent acrylic nano-gel adhesive with a removable red protective film. Flexible, cut-to-length tape that can be removed and washed for reuse on suitable surfaces. Test delicate or painted finishes in an inconspicuous area first; removal without marks cannot be guaranteed on every surface.Specifications Type: Clear double-sided nano-gel adhesive tape Width: 18mm Thickness: 1mm Roll length: 2m Colour: Clear adhesive with red protective liner Material: Acrylic nano-gel Water-resistant adhesive; washable and reusable on suitable surfaces Suitable surfaces: Clean, smooth glass, metal, tile and compatible plastics; test other surfaces before use Included1 × 18mm wide, 2m long roll of clear double-sided nano tapeFor FPV aircraft, this tape is an aid to battery grip, not a replacement for a secure mechanical battery strap. Avoid applying to sensitive electronics, vents or hot components.

Pack of ten M4 black oxide carbon steel hex socket countersunk screws for FPV frames, larger builds, plates, mounts and applications where a flush or near-flush screw head is required. Manufactured from high-strength Grade 10.9 carbon steel with a black oxide finish. The DIN 7991 countersunk head is designed to sit into a matching countersunk recess, while the internal hex drive provides secure Allen-key engagement. Specification Thread: M4 Thread pitch: 0.7mm Strength class: 10.9 Material: Carbon steel Finish: Black oxide Drive: Internal hex / Allen Head style: Flat head countersunk Standard: DIN 7991 Available lengths: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm and 25mm Pack size: 10 screws of the selected length Choose the required screw length from the options.

Pack of ten M3 black oxide carbon steel hex socket countersunk screws for FPV frames, plates, mounts and applications where a flush or near-flush screw head is required. Manufactured from high-strength Grade 10.9 carbon steel with a black oxide finish. The DIN 7991 countersunk head is designed to sit into a matching countersunk recess, while the internal hex drive provides secure Allen-key engagement. Specification Thread: M3 Thread pitch: 0.5mm Strength class: 10.9 Material: Carbon steel Finish: Black oxide Drive: Internal hex / Allen Head style: Flat head countersunk Standard: DIN 7991 Available lengths: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm and 25mm Pack size: 10 screws of the selected length Choose the required screw length from the options.

Pack of ten M4 black oxide carbon steel hex socket button head screws for FPV frames, larger drone builds, braces, mounts and general workshop hardware. Manufactured from high-strength Grade 10.9 carbon steel with a black oxide finish. The rounded low-profile button head provides a broad, tidy bearing surface without the height of a standard socket cap head, while the internal hex drive gives positive Allen-key engagement. Specification Thread: M4 Thread pitch: 0.7mm Strength class: 10.9 Material: Carbon steel Finish: Black oxide Drive: Internal hex / Allen Head style: Button / pan-button head Available lengths: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm and 25mm Pack size: 10 screws of the selected length Choose the required screw length from the options.

Pack of ten M3 black oxide carbon steel hex socket button head screws for FPV frames, electronics mounting, braces, accessories and general drone hardware. Manufactured from high-strength Grade 10.9 carbon steel with a black oxide finish. The rounded low-profile button head keeps the fixing neat and compact, while the internal hex drive gives positive Allen-key engagement for assembly and maintenance. Specification Thread: M3 Thread pitch: 0.5mm Strength class: 10.9 Material: Carbon steel Finish: Black oxide Drive: Internal hex / Allen Head style: Button / pan-button head Available lengths: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm and 25mm Pack size: 10 screws of the selected length Choose the required screw length from the options.

HGLRC KRATOS compact LiPo battery safety bag for charging, storage and transport. HGLRC lists an 80 × 120 × 180mm size, 125g product weight and an outer PVC mesh layer, with fire-resistant, water-resistant and battery-protection functions.Specifications Brand: HGLRC Model: KRATOS Type: LiPo battery safety bag Dimensions: 80 × 120 × 180mm Weight: 125g Outer material: PVC mesh Closure: zippered lid Carry handle: yes Manufacturer-listed functions: fire resistance, water resistance and lithium battery protection Included1 × HGLRC KRATOS battery safety bagSafety note: A battery safety bag can add a layer of protection around LiPo batteries but cannot eliminate fire risk. Charge and store LiPo batteries using appropriate supervision and safe procedures.

SEQURE copper desoldering braid for removing excess solder from pads, joints and component leads during FPV electronics repair and rework. Product type: desoldering braid / solder wick Material: braided copper Format: compact spool Use: solder removal and pad clean-up Included1 × spool of tin absorber wirePlace the braid over the solder to be removed and heat through the braid with a soldering iron. Allow the used section to cool before cutting or handling.

The SEQURE Dry Soldering Iron Tip Cleaner uses a replaceable metal cleaning-wool insert to remove residual solder and oxidation from soldering iron tips without water. The enclosed holder helps contain loose solder debris and can be opened for cleaning.Specifications Product: Dry soldering iron tip cleaner Manufacturer SKU: PJ0000JZQ Cleaning method: Metal cleaning-wool insert Water required: No Holder: Enclosed two-piece base Net product weight: approximately 103g Manufacturer packed weight: approximately 200g Manufacturer packed dimensions: approximately 130 × 120 × 160mm Included 1 × cleaning holder and base 1 × metal cleaning-wool insert SafetyAllow solder residue to cool before opening or emptying the holder. Wear gloves when replacing the cleaning insert and keep the cleaner upright while opening it.

The SEQURE MSS12 Pro is a compact AC/DC soldering station for FPV workshop and field repairs. This listing also includes genuine compatible SEQURE T12 replacement tips, so you can choose the complete MSS12 Pro kit or an individual T12-series spare tip.Choose your item MSS12 Pro Kit – T12-D24: complete soldering station kit supplied with one T12-D24 tip and UK mains lead. T12-B2 Replacement Tip: one conical R0.5 T12 tip only. T12-BC2 Replacement Tip: one 2mm 45° bevel T12 tip only. T12-C4 Replacement Tip: one T12-C4 replacement tip only. T12-D24 Replacement Tip: one 2.4mm chisel T12 tip only. MSS12 Pro specifications Model: MSS12 Pro Included kit tip: T12-D24 Temperature range: 100–450°C / 212–842°F Display: 1.14-inch colour LCD with adjustable brightness and colours AC input: 100–240V USB-C input: PD2.0/3.0 and QC2.0/3.0 DC input: 12–25V Battery input: 3S–6S LiPo via rear XT60 connector Tip compatibility: SEQURE T12-series tips Controls: rotary function knob with °C/°F selection Functions: temperature compensation, self-calibration, buzzer alerts and firmware upgrades Protection: low-voltage, high-voltage and high-temperature warnings Housing: aluminium alloy Manufacturer overall dimensions: 120 × 80 × 30mm Product net weight: 275g MSS12 Pro Kit variant includes 1 × SEQURE MSS12 Pro soldering station 1 × soldering-iron handle 1 × T12-D24 soldering tip 1 × soldering-iron stand with brass tip cleaner 1 × UK mains power lead 1 × storage case 1 × instruction manual Replacement tip information T12-B2: conical tip, R0.5 profile T12-BC2: 2mm bevel tip, 45° profile T12-C4: T12-series C4 replacement tip T12-D24: 2.4mm chisel tip, 0.5mm thickness Overall tip size: 155 × 6.2 × 6.2mm Net tip weight: 8g Maximum stated temperature: 450°C Construction: alloy-plated red copper base with stainless-steel casing Each replacement-tip variant contains one tip only.Compatibility and safetyUSB-C and LiPo power cables are not included. Confirm the supply voltage and connector polarity before use. Disconnect power and allow the tip to cool completely before changing it. SEQURE states that current production units no longer support a custom boot logo.