Search: “AMASS”

Genuine AMASS XT30U, XT60H, XT90H & MR30 Connectors – Packs of 5 Pairs

Genuine AMASS male and female connector packs for FPV drones, RC models, LiPo batteries, ESCs, motors, chargers and workshop leads. Choose XT30U, XT60H, XT90H or MR30. Every option is supplied as a pack of five complete matching male-and-female connector pairs. XT60H, XT90H and MR30 packs also include the corresponding insulating rear covers.Choose the right connector XT30U: Compact two-pin connector for lightweight FPV and RC power wiring. AMASS rates the cable model to 20A maximum with 16AWG cable under its stated temperature-rise test condition. XT60H: Two-pin main-power connector with rear covers for medium-current battery and ESC installations. Rated to 35A maximum with 12AWG cable under the manufacturer’s test condition. XT90H: Larger two-pin connector for higher-current battery and ESC wiring. Rated to 45A maximum with 10AWG cable under the manufacturer’s test condition. This is the standard XT90H and is not the anti-spark XT90S. MR30: Compact three-pin connector for keeping brushless motor-to-ESC phase connections together. Rated to 20A maximum with 16AWG cable under the manufacturer’s test condition. Shared AMASS specifications 500V DC maximum voltage 100 mating cycles IP40 protection rating -20°C to +120°C working temperature UL94 V-0 flame-retardant housing Gold-plated contacts Solder termination Pack contents XT30U pack: 5 male connectors + 5 female connectors, forming 5 complete pairs XT60H pack: 5 male connectors + 5 female connectors + 10 rear covers, forming 5 complete pairs XT90H pack: 5 male connectors + 5 female connectors + 10 rear covers, forming 5 complete pairs MR30 pack: 5 three-pin male connectors + 5 three-pin female connectors + 10 rear covers, forming 5 complete pairs Installation and safetyThese are solder connectors and require competent installation. Confirm battery polarity before connection and confirm all three motor phases when fitting MR30. Use the appropriate cable gauge and a suitably powerful soldering iron so each joint is completed quickly without overheating the nylon housing. Fully insulate the soldered terminals, keep positive and negative conductors separated, and never solder with a battery connected.Current capability depends on cable gauge, solder quality, ventilation, ambient temperature and installation conditions. Do not exceed the rating of the cable or the weakest component in the power system.