Search: “Gemfan”
Searching the Pure Drone catalogue…
Gemfan 5129.2 MinJae 5.1-Inch 3-Blade Propellers 4-Pack
The Gemfan 5129.2 MinJae is an ultra-lightweight 3-blade FPV racing propeller developed with Korean racing pilot Minjae Kim. 4-Pack Designed for technical race tracks, rapid direction changes and precise gate control, each propeller weighs only 4.12g. Its low rotational inertia provides sharp steering response and fast recovery while retaining the grip and control of a tri-blade design. Key features: • 5.1-inch racing propeller• 2.92-inch pitch• 3-blade design• Lightweight 4.12g construction per propeller• Approximately 10% lighter than conventional racing propellers• Reduced rotational inertia for quicker steering response• Durable polycarbonate construction• 5mm centre mounting hole• Optimised for 2207 motors• Designed for fast, technical FPV racing• Supplied as a set of four: 2 × CW and 2 × CCW Specifications: Manufacturer: GemfanModel: 5129.2 MinJaePropeller diameter: 130.3mm, approximately 5.1 inchesPitch: 2.92 inchesBlade count: 3Material: PolycarbonateWeight: 4.12g per propellerCentre thickness: 6.2mmCentre-hole diameter: 5mmMaximum blade width: 14.9mmRecommended motor size: 2207Recommended take-off weight: approximately 500gRotation supplied: 2 × clockwise and 2 × counter-clockwisePack quantity: 4 propellers Available colours: • Yellow• Purple• Pink Package contents: • 2 × clockwise Gemfan 5129.2 propellers• 2 × counter-clockwise Gemfan 5129.2 propellers Always check each propeller for cracks, distortion or impact damage before flight. Replace damaged propellers immediately and confirm the correct clockwise and counter-clockwise orientation before arming.
Gemfan Hurricane 51377 MAX 5.1-Inch 3-Blade Propellers 4-Pack
The Gemfan Hurricane 51377 MAX is a reinforced 3-blade FPV racing propeller designed for modern high-output 5-inch competition builds. Its 5.1-inch diameter and 3-inch pitch provide responsive acceleration, stable power delivery and predictable grip through gates and fast corners. Reinforced high-stress areas improve impact resistance, helping the propeller retain its shape after minor contact during racing. Key features: • 5.1-inch racing propeller• 3-inch pitch• 3-blade design• Approximately 4.5g per propeller• Reinforced high-stress areas• Durable polycarbonate construction• Responsive acceleration• Stable and predictable power delivery• 5mm centre mounting hole• Optimised for 2207 2100KV motors and similar racing setups• Designed for competitive FPV racing and high-speed track flying• Supplied as a set of four: 2 × CW and 2 × CCW Specifications: Manufacturer: GemfanModel: Hurricane 51377 MAXPropeller diameter: 129.7mm, approximately 5.1 inchesPitch: 3 inchesBlade count: 3Material: PolycarbonateWeight: approximately 4.5g per propellerCentre thickness: 6.1mmCentre-hole diameter: 5mmMaximum blade width: 14.7mmRecommended motor: 2207 2100KV or similar racing setupRotation supplied: 2 × clockwise and 2 × counter-clockwisePack quantity: 4 propellers Available colours: • Macho Pink• Neon Yellow Package contents: • 2 × clockwise Gemfan Hurricane 51377 MAX propellers• 2 × counter-clockwise Gemfan Hurricane 51377 MAX propellers Always inspect each propeller for cracks, distortion or impact damage before flight. Replace damaged propellers immediately and confirm the correct clockwise and counter-clockwise orientation before arming.
Gemfan Hurricane 51433 5.1-Inch 3-Blade Propellers 4-Pack
The Gemfan Hurricane 51433 is a lightweight 3-blade FPV propeller developed for smooth and responsive 5-inch freestyle flying. 4-Pack Its 5.1-inch diameter and 3.5-inch pitch provide a controlled, linear throttle response with enough power for technical manoeuvres, fast recoveries and flowing freestyle lines. Lightweight polycarbonate construction reduces rotational mass for rapid motor response while retaining the durability needed for regular freestyle use. Key features: • 5.1-inch freestyle propeller• 3.5-inch pitch• 3-blade design• Approximately 3.8g per propeller• Durable polycarbonate construction• Smooth and predictable throttle response• Lightweight design for quick motor response• 5mm centre mounting hole• Suitable for 2206 to 2306 motors• Designed for 5-inch FPV freestyle quadcopters• Supplied as a set of four: 2 × CW and 2 × CCW Specifications: Manufacturer: GemfanModel: Hurricane 51433Propeller diameter: approximately 129.7mm / 5.1 inchesPitch: 3.5 inchesBlade count: 3Material: PolycarbonateWeight: approximately 3.8g per propellerCentre thickness: 6mmCentre-hole diameter: 5mmMaximum blade width: approximately 14.3mmRecommended motor size: 2206 to 2306Rotation supplied: 2 × clockwise and 2 × counter-clockwisePack quantity: 4 propellers Available colours: • Pink• Yellow Package contents: • 2 × clockwise Gemfan Hurricane 51433 propellers• 2 × counter-clockwise Gemfan Hurricane 51433 propellers Always inspect each propeller for cracks, distortion or impact damage before flight. Replace damaged propellers immediately and confirm the correct clockwise and counter-clockwise orientation before arming.
Gemfan MCK 51366 ReV3 5.1-Inch 3-Blade Propellers 4-Pack
The Gemfan Hurricane MCK 51366 ReV3 is a lightweight 3-blade FPV racing propeller developed with championship racing pilot MCK. 4-Pack The ReV3 uses a reduced 2.8-inch pitch for fast throttle response, strong acceleration and precise cornering control on technical race tracks. Its lightweight polycarbonate construction provides a balance of grip, speed and impact resistance for competitive 5-inch FPV racing. Key features: • 5.1-inch-class racing propeller• 2.8-inch pitch• 3-blade design• Lightweight 4.2g construction per propeller• Durable polycarbonate construction• Fast throttle response and strong punch• High cornering grip and precise control• 5mm centre mounting hole• Optimised for 2207 and 2306 motors• Designed for high-KV 6S racing setups• Supplied as a set of four: 2 × CW and 2 × CCW Specifications: Manufacturer: GemfanModel: Hurricane MCK 51366 ReV3Propeller diameter: 129.7mm, approximately 5.1-inch classPitch: 2.8 inchesBlade count: 3Material: PolycarbonateWeight: 4.2g per propellerCentre thickness: 6.6mmCentre-hole diameter: 5mmMaximum blade width: 14.9mmRecommended motor size: 2207 or 2306Rotation supplied: 2 × clockwise and 2 × counter-clockwisePack quantity: 4 propellers Available colours: • Strawberry Jam• Mint Green• Radioactive Yellow• Litchi Red Package contents: • 2 × clockwise Gemfan MCK 51366 ReV3 propellers• 2 × counter-clockwise Gemfan MCK 51366 ReV3 propellers Always inspect each propeller for cracks, distortion or impact damage before flight. Replace damaged propellers immediately and confirm the correct clockwise and counter-clockwise orientation before arming.
Gemfan YUKI 5129 5.1-Inch 3-Blade Propellers 4-Pack
The Gemfan YUKI 5129 is a lightweight 3-blade FPV propeller designed for responsive 5-inch racing and fast freestyle builds. Pack of 4 Its 5.1-inch diameter and 2.9-inch pitch provide quick acceleration, precise throttle control and predictable handling at higher speeds. Durable polycarbonate construction combines low rotational weight with the resilience needed for regular FPV flying. Key features: • 5.1-inch FPV propeller• 2.9-inch pitch• 3-blade design• Approximately 4.5g per propeller• Durable polycarbonate construction• Responsive acceleration and precise throttle control• 5mm centre mounting hole• Suitable for 2207 and 2306 motors• Intended for 500–600g FPV quadcopters• Suitable for racing and fast freestyle• Supplied as a set of four: 2 × CW and 2 × CCW Specifications: Manufacturer: GemfanModel: YUKI 5129Propeller diameter: 129.7mm, approximately 5.1 inchesPitch: 2.9 inchesBlade count: 3Material: PolycarbonateWeight: approximately 4.5g per propellerCentre thickness: 6.1mmCentre-hole diameter: 5mmMaximum blade width: 14.7mmRecommended motor size: 2207 or 2306Recommended take-off weight: 500–600gRotation supplied: 2 × clockwise and 2 × counter-clockwisePack quantity: 4 propellers Available colours: • Blue• Pink• Purple• Yellow Package contents: • 2 × clockwise Gemfan YUKI 5129 propellers• 2 × counter-clockwise Gemfan YUKI 5129 propellers Always inspect each propeller for cracks, distortion or impact damage before flight. Replace damaged propellers immediately and confirm the correct clockwise and counter-clockwise orientation before arming.