Search: “SEQURE”
Searching the Pure Drone catalogue…
SEQURE 1–8S LiPo Battery Voltage Tester & Low-Voltage Alarm
The SEQURE 1–8S LiPo Battery Voltage Tester displays total pack voltage and individual cell voltages through a battery’s balance connector. For 2–8S packs, the twin buzzer can also provide an adjustable low-voltage warning.Specifications Battery compatibility: 1–8S LiPo, Li-ion, LiMn and LiFe Low-voltage alarm: 2–8S Alarm setting range: OFF or 2.7–3.8V per cell Default alarm setting: 3.3V per cell Cell-voltage display range: 0.5–4.5V Total-voltage display range: 0.5–36V 1S test-mode range: 3.7–30V Stated voltage accuracy: ±0.01V Alarm indication: twin buzzer and red LED Protection: reverse-polarity protection Dimensions: 40 × 25 × 11mm Net weight: 9g Included1 × SEQURE 1–8S battery voltage tester and low-voltage alarmConnection noteConnect the battery balance plug with its negative wire aligned to the tester’s negative pin. The alarm protects against excessive discharge only when it remains connected and is set appropriately for the battery chemistry and load.
SEQURE Blueson A1 6S 65A AM32 4-in-1 ESC
The SEQURE Blueson A1 6S 65A is a 4-in-1 ESC with AM32 firmware for 2–6S LiPo and LiHV FPV builds. It uses an AT32F421 32-bit processor with an adjustable 8–128kHz PWM frequency. Telemetry and current sensing are supported, with a 20 × 20mm M3 mounting pattern. Specifications ESC type: 4-in-1Firmware: AM32Processor: AT32F421Input voltage: 2–6S LiPo or LiHVContinuous current: 65A per channelPeak current: 120A per channelPWM frequency: 8–128kHzMotor protocols: DShot150, DShot300, DShot600, OneShot, MultiShot and PWMTelemetry: SupportedCurrent sensing: SupportedBEC: NoneMounting pattern: 20 × 20mm, M3Dimensions: 42.5 × 36 × 7mmProduct weight: Approximately 19g Included 1 × SEQURE Blueson A1 4-in-1 ESC1 × 30AWG 40mm reverse double-ended SH1.0-8P cable1 × 30AWG 60mm single-ended SH1.0-8P cable2 × 12AWG 100mm power cables, red and black1 × XT60H-M male connector1 × 35V 680µF solid capacitor5 × M3 × 8mm shock-absorbing mounts Important This ESC does not include a BEC. Check the power requirements of the flight controller, receiver and video system before installation. Use the supplied capacitor and appropriately rated battery cable and connectors. Confirm firmware settings, motor direction and failsafe operation before fitting propellers.
SEQURE Blueson A1 8S 70A BLHeli_32 4-in-1 ESC
The SEQURE Blueson A1 8S 70A is a 4-in-1 ESC with BLHeli_32 firmware for 2–8S LiPo and LiHV FPV builds. It uses an AT32F421 32-bit processor with an adjustable 8–128kHz PWM frequency. Telemetry and current sensing are supported, with a 20 × 20mm M3 mounting pattern. Specifications ESC type: 4-in-1Firmware: BLHeli_32Processor: AT32F421Input voltage: 2–8S LiPo or LiHVContinuous current: 70A per channelPeak current: 150A per channelPWM frequency: 8–128kHzMotor protocols: DShot150, DShot300, DShot600, OneShot, MultiShot and PWMTelemetry: SupportedCurrent sensing: SupportedBEC: NoneMounting pattern: 20 × 20mm, M3Dimensions: 42.5 × 36 × 7mmProduct weight: Approximately 19g Included 1 × SEQURE Blueson A1 4-in-1 ESC1 × 30AWG 40mm reverse double-ended SH1.0-8P cable1 × 30AWG 60mm single-ended SH1.0-8P cable2 × 12AWG 100mm power cables, red and black1 × XT60H-M male connector1 × 35V 680µF solid capacitor5 × M3 × 8mm shock-absorbing mounts Important This ESC does not include a BEC. Check the power requirements of the flight controller, receiver and video system before installation. Use the supplied capacitor and appropriately rated battery cable and connectors. Confirm the firmware settings, motor direction and failsafe operation before fitting propellers.
SEQURE Dry Soldering Iron Tip Cleaner
The SEQURE Dry Soldering Iron Tip Cleaner uses a replaceable metal cleaning-wool insert to remove residual solder and oxidation from soldering iron tips without water. The enclosed holder helps contain loose solder debris and can be opened for cleaning.Specifications Product: Dry soldering iron tip cleaner Manufacturer SKU: PJ0000JZQ Cleaning method: Metal cleaning-wool insert Water required: No Holder: Enclosed two-piece base Net product weight: approximately 103g Manufacturer packed weight: approximately 200g Manufacturer packed dimensions: approximately 130 × 120 × 160mm Included 1 × cleaning holder and base 1 × metal cleaning-wool insert SafetyAllow solder residue to cool before opening or emptying the holder. Wear gloves when replacing the cleaning insert and keep the cleaner upright while opening it.
SEQURE H743 MPU6000 4–8S Dual-BEC Flight Controller
The SEQURE H743 is a 4–8S flight controller using a 480MHz STM32H743 processor and MPU6000 gyro. It supports both 20×20mm and 30.5×30.5mm mounting, with eight motor outputs for standard quadcopters and X8 builds. Specifications Processor: STM32H743, 480MHz Gyro: MPU6000 Barometer: BMP280, DPS310 or DPS368, depending on production batch Input voltage: 4–8S LiPo/LiHV BEC outputs: 5V 2.5A and 10V 2A UARTs: 6 Motor outputs: M1–M8 ESC telemetry: RX8 Blackbox: 16MB onboard flash OSD: AT7456E analogue OSD Firmware target: SEQUREH7 Firmware support: Betaflight, INAV and ArduPilot USB: USB-C LED support: WS2812 Mounting: 20×20mm and 30.5×30.5mm, 4mm holes Board size: 36.5 × 36.5 × 6mm Board weight: 7.5g Video-system power The separate 10V 2A BEC can power compatible digital or analogue video equipment, including DJI O3, O4 and O4 Pro systems. Check the connected equipment’s voltage and current requirements before powering it. Included SEQURE H743 flight controller 40mm 30AWG SH1.0-8P double-ended ribbon cable 100mm 30AWG SH1.0-4P cable 5V buzzer with 60mm leads 5 × M3 × 8mm vibration-damping grommets 5 × M3 × 6.6mm vibration-damping grommets Installation: Check the wiring diagram, connector pinout and required output voltage before applying power. Use the SEQUREH7 firmware target.
SEQURE MSS12 Pro AC/DC Soldering Station Kit & T12 Replacement Tips
The SEQURE MSS12 Pro is a compact AC/DC soldering station for FPV workshop and field repairs. This listing also includes genuine compatible SEQURE T12 replacement tips, so you can choose the complete MSS12 Pro kit or an individual T12-series spare tip.Choose your item MSS12 Pro Kit – T12-D24: complete soldering station kit supplied with one T12-D24 tip and UK mains lead. T12-B2 Replacement Tip: one conical R0.5 T12 tip only. T12-BC2 Replacement Tip: one 2mm 45° bevel T12 tip only. T12-C4 Replacement Tip: one T12-C4 replacement tip only. T12-D24 Replacement Tip: one 2.4mm chisel T12 tip only. MSS12 Pro specifications Model: MSS12 Pro Included kit tip: T12-D24 Temperature range: 100–450°C / 212–842°F Display: 1.14-inch colour LCD with adjustable brightness and colours AC input: 100–240V USB-C input: PD2.0/3.0 and QC2.0/3.0 DC input: 12–25V Battery input: 3S–6S LiPo via rear XT60 connector Tip compatibility: SEQURE T12-series tips Controls: rotary function knob with °C/°F selection Functions: temperature compensation, self-calibration, buzzer alerts and firmware upgrades Protection: low-voltage, high-voltage and high-temperature warnings Housing: aluminium alloy Manufacturer overall dimensions: 120 × 80 × 30mm Product net weight: 275g MSS12 Pro Kit variant includes 1 × SEQURE MSS12 Pro soldering station 1 × soldering-iron handle 1 × T12-D24 soldering tip 1 × soldering-iron stand with brass tip cleaner 1 × UK mains power lead 1 × storage case 1 × instruction manual Replacement tip information T12-B2: conical tip, R0.5 profile T12-BC2: 2mm bevel tip, 45° profile T12-C4: T12-series C4 replacement tip T12-D24: 2.4mm chisel tip, 0.5mm thickness Overall tip size: 155 × 6.2 × 6.2mm Net tip weight: 8g Maximum stated temperature: 450°C Construction: alloy-plated red copper base with stainless-steel casing Each replacement-tip variant contains one tip only.Compatibility and safetyUSB-C and LiPo power cables are not included. Confirm the supply voltage and connector polarity before use. Disconnect power and allow the tip to cool completely before changing it. SEQURE states that current production units no longer support a custom boot logo.
SEQURE SI012 Pro Max Portable Soldering Iron Kit & TS Replacement Tips
The SEQURE SI012 Pro Max is a compact OLED soldering iron for workshop and field repairs. This listing also includes genuine compatible SEQURE TS replacement tips, so you can choose the complete SI012 Pro Max kit or an individual TS-series spare tip.Choose your item SI012 Pro Max Kit – TS-D24: complete portable soldering iron kit supplied with one TS-D24 tip. TS-D24 Replacement Tip: one compatible replacement tip only. TS-C4 Replacement Tip: one compatible replacement tip only. TS-B2 Replacement Tip: one compatible replacement tip only. SI012 Pro Max specifications Maximum temperature: 450°C / 842°F Power input: USB-C PD3.0, QC2.0, DC 12–25V or 3S–6S LiPo Display: 0.91-inch OLED with adjustable brightness Temperature control: compensation and self-calibration Display options: °C/°F selection and left/right screen rotation Alerts: low voltage, high voltage and high temperature Housing: transparent high-temperature-resistant PC Other functions: adjustable sensitivity, automatic heat-up, power limiting, colour ambient lighting and firmware upgrades Compatible tip families: T12, TS and SI Dimensions with tip fitted: approximately 180 × 16 × 18mm Iron weight with tip: approximately 35g Manufacturer packed weight including outer carton: 240g SI012 Pro Max Kit variant includes 1 × SEQURE SI012 Pro Max soldering iron 1 × TS-D24 soldering tip 1 × soldering-iron stand 1 × storage case 1 × solder wire 1 × XT60-to-DC5525 power cable 1 × hex key with fixing screws Replacement tip informationTS-D24, TS-C4 and TS-B2 are genuine SEQURE replacement tips compatible with the SI012 Pro Max. Each replacement-tip variant contains one tip only. SEQURE states an approximate TS tip length of 103–109mm and describes the tips as using an internal ceramic heating core with the tip and heater integrated.Power and safety noteA mains power supply is not included with the kit. Confirm the polarity and output of any DC, USB-C or battery supply before connection. Disconnect power and allow the tip to cool completely before changing it, and disconnect power when the iron is unattended.
SEQURE Tin Absorber Wire – Copper Desoldering Wick
SEQURE copper desoldering braid for removing excess solder from pads, joints and component leads during FPV electronics repair and rework. Product type: desoldering braid / solder wick Material: braided copper Format: compact spool Use: solder removal and pad clean-up Included1 × spool of tin absorber wirePlace the braid over the solder to be removed and heat through the braid with a soldering iron. Allow the used section to cool before cutting or handling.
Kapton Tape - High Temperature Insulation Tape – 15mm
SEQURE high-temperature insulation tape for FPV electronics, battery work and workshop repairs. The 15mm-wide tape is suitable for insulating and protecting electrical components in applications where heat resistance is important.Specifications Brand: SEQURE Width: 15mm Maximum stated temperature resistance: 180°C Approximate outer roll diameter: 95mm Net weight: 40g Packed weight: approximately 45g Suitable for LiPo and battery wrapping PCB and electronics insulation Electrical repairs Transformers and capacitors Protection boards and workshop use 1 × roll supplied. Roll length is not stated by the manufacturer, so no length specification is claimed on this listing.